Using resources effectively

Last updated on 2024-11-05 | Edit this page

Estimated time: 40 minutes

Overview

Questions

  • “How do we monitor our jobs?”
  • “How can I get my jobs scheduled more easily?”

Objectives

  • “Understand how to look up job statistics and profile code.”
  • “Understand job size implications.”

We’ve touched on all the skills you need to interact with an HPC cluster: logging in over SSH, loading software modules, submitting parallel jobs, and finding the output. Let’s learn about estimating resource usage and why it might matter. To do this we need to understand the basics of benchmarking. Benchmarking is essentially performing simple experiments to help understand how the performance of our work varies as we change the properties of the jobs on the cluster - including input parameters, job options and resources used.

Our example

In the rest of this episode, we will use an example parallel application that calculates an estimate of the value of Pi. Although this is a toy problem, it exhibits all the properties of a full parallel application that we are interested in for this course.

The main resource we will consider here is the use of compute core time as this is the resource you are usually charged for on HPC resources. However, other resources - such as memory use - may also have a bearing on how you choose resources and constrain your choice.

For those that have come across HPC benchmarking before, you may be aware that people often make a distinction between strong scaling and weak scaling:

  • Strong scaling is where the problem size (i.e. the application) stays the same size and we try to use more cores to solve the problem faster.
  • Weak scaling is where the problem size increases at the same rate as we increase the core count so we are using more cores to solve a larger problem.

Both of these approaches are equally valid uses of HPC. This example looks at strong scaling.

Before we work on benchmarking, it is useful to define some terms for the example we will be using

  • Program The computer program we are executing (pi-mpi.py in the examples below)
  • Application The combination of computer program with particular input parameters

Accessing the software and input

Required Files

The program used in this example can be retrieved using wget or a browser and copied to the remote.

Using wget:

BASH 

userid@ln03:~> wget https://epcced.github.io/2024-01-19-hpc-intro-noc/files/pi-mpi.py

Using a web browser:

https://epcced.github.io/2024-01-19-hpc-intro-noc/files/pi-mpi.py

Baseline: running in serial

Before starting to benchmark an application to understand what resources are best to use, you need a baseline performance result. In more formal benchmarking, your baseline is usually the minimum number of cores or nodes you can run on. However, for understanding how best to use resources, as we are doing here, your baseline could be the performance on any number of cores or nodes that you can measure the change in performance from.

Our pi-mpi.py application is small enough that we can run a serial (i.e. using a single core) job for our baseline performance so that is where we will start

Run a single core job

Write a job submission script that runs the pi-mpi.py application on a single core. You will need to take an initial guess as to the walltime to request to give the job time to complete. Submit the job and check the contents of the STDOUT file to see if the application worked or not.

Creating a file called submit-pi-mpi.slurm:

BASH 

#!/bin/bash
#SBATCH --partition=standard
#SBATCH --qos=short
#SBATCH --reservation=

#SBATCH --job-name=pi-mpi
#SBATCH --nodes=1
#SBATCH --tasks-per-node=1
#SBATCH --time=00:15:00
srun python pi-mpi.py 10000000

Run application using a single process (i.e. in serial) with a blocking srun command:

BASH 

srun python pi-mpi.py 10000000

Submit with to the batch queue with:

BASH 

  submit-pi-mpi.slurm

Output in the job log should look something like:

OUTPUT 

Generating 10000000 samples.
Rank 0 generating 10000000 samples on host nid001246.
Numpy Pi:  3.141592653589793
My Estimate of Pi:  3.1416708
1 core(s), 10000000 samples, 228.881836 MiB memory, 0.423903 seconds, -0.002487% error

Once your job has run, you should look in the output to identify the performance. Most HPC programs should print out timing or performance information (usually somewhere near the bottom of the summary output) and pi-mpi.py is no exception. You should see two lines in the output that look something like:

BASH 

256 core(s), 100000000 samples, 2288.818359 MiB memory, 0.135041 seconds, -0.004774% error
Total run time=0.18654435999997077s

You can also get an estimate of the overall run time from the final job statistics. If we look at how long the finished job ran for, this will provide a quick way to see roughly what the runtime was. This can be useful if you want to know quickly if a job was faster or not than a previous job (as you do not have to find the output file to look up the performance) but the number is not as accurate as the performance recorded by the application itself and also includes static overheads from running the job (such as loading modules and startup time) that can skew the timings. To do this on use sacct -l -j with the job ID, e.g.:

BASH 

userid@uan01:/work/ta133/ta133/userid> sacct -l -j 12345

OUTPUT 


JOBID USER         ACCOUNT     NAME           ST REASON START_TIME         T...
36856 yourUsername yourAccount example-job.sh R  None   2017-07-01T16:47:02 ...

Running in parallel and benchmarking performance

We have now managed to run the pi-mpi.py application using a single core and have a baseline performance we can use to judge how well we are using resources on the system.

Note that we also now have a good estimate of how long the application takes to run so we can provide a better setting for the walltime for future jobs we submit. Lets now look at how the runtime varies with core count.

Benchmarking the parallel performance

Modify your job script to run on multiple cores and evaluate the performance of pi-mpi.py on a variety of different core counts and use multiple runs to complete a table like the one below. If you examine the log file you will see that it contains two timings: the total time taken by the entire program and the time taken solely by the calculation. The calculation of Pi from the Monte-Carlo counts is not parallelised so this is a serial overhead, performed by a single processor. The calculation part is, in theory, perfectly parallel (each processor operates on independent sets of unique random numbers ) so this should get faster on more cores. The Calculation core seconds is the calculation time multiplied by the number of cores.

Cores Overall run time (s) Calculation time (s) Calculation core seconds
1 (serial)
2
4
8
16
32
64
128
256

Look at your results – do they make sense? Given the structure of the code, you would expect the performance of the calculation to increase linearly with the number of cores: this would give a roughly constant figure for the Calculation core seconds. Is this what you observe?

The table below shows example timings for runs on ARCHER2

Cores Overall run time (s) Calculation time (s) Calculation core seconds
1 3.931 3.854 3.854
2 2.002 1.930 3.859
4 1.048 0.972 3.888
8 0.572 0.495 3.958
16 0.613 0.536 8.574
32 0.360 0.278 8.880
64 0.249 0.163 10.400
128 0.170 0.083 10.624
256 0.187 0.135 34.560

Understanding the performance

Now we have some data showing the performance of our application we need to try and draw some useful conclusions as to what the most efficient set of resources are to use for our jobs. To do this we introduce two metrics:

  • Actual speedup The ratio of the baseline runtime (or runtime on the lowest core count) to the runtime at the specified core count. i.e. baseline runtime divided by runtime at the specified core count.
  • Ideal speedup The expected speedup if the application showed perfect scaling. i.e. if you double the number of cores, the application should run twice as fast.
  • Parallel efficiency The fraction of ideal speedup actually obtained for a given core count. This gives an indication of how well you are exploiting the additional resources you are using.

We will now use our performance results to compute these two metrics for the sharpen application and use the metrics to evaluate the performance and make some decisions about the most effective use of resources.

Computing the speedup and parallel efficiency

Use your Overall run times from above to fill in a table like the one below.

Cores Overall run time (s) Ideal speedup Actual speedup Parallel efficiency
1 (serial)
2
4
8
16
32
64
128
256

Given your results, try to answer the following questions:

  1. What is the core count where you get the most efficient use of resources, irrespective of run time?
  2. What is the core count where you get the fastest solution, irrespective of efficiency?
  3. What do you think a good core count choice would be for this application that balances time to solution and efficiency? Why did you choose this option?

The table below gives example results for ARCHER2 based on the example runtimes given in the solution above.

Cores Overall run time (s) Ideal speedup Actual speedup Parallel efficiency
1 3.931 1.000 1.000 1.000
2 2.002 2.000 1.963 0.982
4 1.048 4.000 3.751 0.938
8 0.572 8.000 6.872 0.859
16 0.613 16.000 6.408 0.401
32 0.360 32.000 10.928 0.342
64 0.249 64.000 15.767 0.246
128 0.170 128.000 23.122 0.181
256 0.187 256.000 21.077 0.082

What is the core count where you get the most efficient use of resources?

Just using a single core is the cheapest (and always will be unless your speedup is better than perfect – “super-linear” speedup). However, it may not be possible to run on small numbers of cores depending on how much memory you need or other technical constraints. Note: on most high-end systems, nodes are not shared between users. This means you are charged for all the CPU-cores on a node regardless of whether you actually use them. Typically we would be running on many hundreds of CPU-cores not a few tens, so the real question in practice is: what is the optimal number of nodes to use? ### What is the core count where you get the fastest solution, irrespective of efficiency? 256 cores gives the fastest time to solution. The fastest time to solution does not often make the most efficient use of resources so to use this option, you may end up wasting your resources. Sometimes, when there is time pressure to run the calculations, this may be a valid approach to running applications. ### What do you think a good core count choice would be for this application to use?

8 cores is probably a good number of cores to use with a parallel efficiency of 86%. Usually, the best choice is one that delivers good parallel efficiency with an acceptable time to solution. Note that acceptable time to solution differs depending on circumstances so this is something that the individual researcher will have to assess. Good parallel efficiency is often considered to be 70% or greater though many researchers will be happy to run in a regime with parallel efficiency greater than 60%. As noted above, running with worse parallel efficiency may also be useful if the time to solution is an overriding factor.

Tips

Here are a few tips to help you use resources effectively and efficiently on HPC systems:

  • Know what your priority is: do you want the results as fast as possible or are you happy to wait longer but get more research for the resources you have been allocated?
  • Use your real research application to benchmark but try to shorten the run so you can turn around your benchmarking runs in a short timescale. Ideally, it should run for 10-30 minutes; short enough to run quickly but long enough so the performance is not dominated by static startup overheads (though this is application dependent). Ways to do this potentially include, for example: using a smaller number of time steps, restricting the number of SCF cycles, restricting the number of optimisation steps.
  • Use basic benchmarking to help define the best resource use for your application. One useful strategy: take the core count you are using as the baseline, halve the number of cores/nodes and rerun and then double the number of cores/nodes from your baseline and rerun. Use the three data points to assess your efficiency and the impact of different core/node counts.

Key Points

  • “The smaller your job, the faster it will schedule.”