Reproducible computational environments using containers: Introduction to Singularity: Setup

There are a number of tasks you need to complete before the workshop to ensure that you get the best learning experience:

  1. Create a Docker Hub account (if you do not already have one)
  2. Make sure you have a working installation of Docker Desktop or Docker on your laptop
  3. Create an account on ARCHER2 - even if you have an existing ARCHER2 account, you should create a new one for this workshop in the course project

Details of these setup steps are provided below.

Create an account on Docker Hub

Please seek help at the start of the lesson if you have not been able to establish a website account on:

Install Docker Desktop or Docker

In most cases, you will need to have administrator rights on the computer in order to install the Docker software. If you are using a computer managed by your organisation and do not have administrator rights, you may be able to get your organisation’s IT staff to install Docker for you. Alternatively your IT support staff may be able to give you remote access to a server that can run Docker commands.

Please try to install the appropriate Docker software from the list below depending on the operating system that your computer is running. Do let the workshop organisers know as early as possible if you are unable to install Docker using these instructions, as there may be other options available.

Microsoft Windows

You must have admin rights to run Docker! Some parts of the lesson will work without running as admin but if you are unable to Run as administrator on your machine some elements of this workshop might not work as described.

Ideally, you will be able to install the Docker Desktop software, following the Docker website’s documentation. Note that the instructions for installing Docker Desktop on Windows 10 Home Edition are different from other versions of Windows 10.

Note that the above installation instructions highlight a minimum version or “build” that is required to be able to install Docker on your Windows 10 system. See Which version of Windows operating system am I running? for details of how to find out which version/build of Windows 10 you have.

If you are unable to follow the above instructions to install Docker Desktop on your Windows system, the final release of the deprecated Docker Toolbox version of Docker for Windows can be downloaded from the releases page of the Docker Toolbox GitHub repository. (Download the .exe file for the Windows installer). Please note that this final release of Docker Toolbox includes an old version of Docker and you are strongly advised not to attempt to use this for any production use. It will, however, enable you to follow along with the lesson material.

Warning: Git Bash

If you are using Git Bash as your terminal on Windows then you should be aware that you may run into issues running some of the commands in this lesson as Git Bash will automatically re-write any paths you specify at the command line into Windows versions of the paths and this will confuse the Docker container you are trying to use. For example, if you enter the command:

docker run alpine cat /etc/os-release

Git Bash will change the /etc/os-release path to C:\etc\os-release\ before passing the command to the Docker container and the container will report an error. If you want to use Git Bash then you can request that this path translation does not take place by adding an extra / to the start of the path. i.e. the command would become:

docker run alpine cat //etc/os-release

This should suppress the path translation functionality in Git Bash.

Apple macOS

Ideally, you will be able to install the Docker Desktop software, following the Docker website’s documentation. The current version of the Docker Desktop software requires macOS version 10.14 (Mojave) or later.

If you already use Homebrew or MacPorts to manage your software, and would prefer to use those tools rather than Docker’s installer, you can do so. For Homebrew, you can run the command brew install --cask docker. Note that you still need to run the Docker graphical user interface once to complete the initial setup, after which time the command line functionality of Docker will become available. The Homebrew install of Docker also requires a minimum macOS version of 10.14. The MacPorts Docker port should support older, as well as the most recent, operating system versions (see the port details), but note that we have not recently tested the Docker installation process via MacPorts.

Linux

There are too many varieties of Linux to give precise instructions here, but hopefully you can locate documentation for getting Docker installed on your Linux distribution. It may already be installed. If it is not already installed on your system, the Install Docker Engine page provides an overview of supported Linux distributions and pointers to relevant installation information. Alternatively, see:

Alternatively, Docker now provide a version of Docker Desktop for some Linux distributions which give a user experience similar to Docker Desktop on Windows or macOS. You can find instructions on installing this at:

Verify Installation

To quickly check if the Docker and client and server are working run the following command in a new terminal or ssh session:

$ docker version

Client:
 Version:           20.10.2
 API version:       1.41
 Go version:        go1.13.8
 Git commit:        20.10.2-0ubuntu2
 Built:             Tue Mar  2 05:52:27 2021
 OS/Arch:           linux/arm64
 Context:           default
 Experimental:      true

Server:
 Engine:
  Version:          20.10.2
  API version:      1.41 (minimum version 1.12)
  Go version:       go1.13.8
  Git commit:       20.10.2-0ubuntu2
  Built:            Tue Mar  2 05:45:16 2021
  OS/Arch:          linux/arm64
  Experimental:     false
 containerd:
  Version:          1.4.4-0ubuntu1
  GitCommit:        
 runc:
  Version:          1.0.0~rc95-0ubuntu1~21.04.1
  GitCommit:        
 docker-init:
  Version:          0.19.0
  GitCommit:

The above output shows a successful installation and will vary based on your system. The important part is that the “Client” and the “Server” parts are both working and returns information. It is beyond the scope of this document to debug installation problems but common errors include the user not belonging to the docker group and forgetting to start a new terminal or ssh session.

Getting an account on ARCHER2

Sign up for a SAFE account

To sign up, you must first register for an account on SAFE (our service administration web application):

If you are already registered on the EPCC SAFE you do not need to re-register. Please proceed to the next step.

  1. Go to the SAFE New User Signup Form
  2. Fill in your personal details. You can come back later and change them if you wish. Note: you should register using your institutional or company email address - email domains such as gmail.com, outlook.com, etc. are not allowed to be used for access to ARCHER2
  3. Click “Submit”
  4. You are now registered. A single use login link will be emailed to the email address you provided. You can use this link to login and set your password.

Sign up for an account on ARCHER2 through SAFE

In addition to your password, you will need an SSH key pair to access ARCHER2. There is useful guidance on how to generate SSH key pairs in the ARCHER2 documentation. It is useful to have your SSH key pair generated before you request an account on ARCHER2 as you can add it when you request the account.

  1. Login to SAFE
  2. Go to the Menu “Login accounts” and select “Request login account”
  3. Choose the ta118 project “Choose Project for Machine Account” box and click “Next”
  4. Select the ARCHER2 machine in the list of available machines
  5. Click Next
  6. Enter a username for the account and an SSH public key
    1. You can always add an SSH key (or additional SSH keys) after your account has been created.
  7. Click Request

Now you have to wait for the course organiser to accept your request to register. When this has happened,your account will be created on ARCHER2. Once this has been done, you should be sent an email. If you have not received an email but believe that your account should have been activated, check your account status in SAFE which will also show when the account has been activated. You can then pick up your one shot initial password for ARCHER2 from your SAFE account.

Log into ARCHER2

You should now be able to log into ARCHER2 by following the login instructions in the ARCHER2 documentation.

A quick tutorial on copy/pasting file contents from episodes of the lesson

Let’s say you want to copy text off the lesson website and paste it into a file named myfile in the current working directory of a shell window. This can be achieved in many ways, depending on your computer’s operating system, but routes I have found work for me: