Working with the scheduler
Last updated on 2024-12-03 | Edit this page
Overview
Questions
- What is a scheduler and why are they used?
- How do I launch a program to run on any one node in the cluster?
- How do I capture the output of a program that is run on a node in the cluster?
Objectives
- Run a simple Hello World style program on the cluster.
- Submit a simple Hello World style script to the cluster.
- Use the batch system command line tools to monitor the execution of your job.
- Inspect the output and error files of your jobs.
Job Scheduler
An HPC system might have thousands of nodes and thousands of users. How do we decide who gets what and when? How do we ensure that a task is run with the resources it needs? This job is handled by a special piece of software called the scheduler. On an HPC system, the scheduler manages which jobs run where and when.
The following illustration compares these tasks of a job scheduler to a waiter in a restaurant. If you can relate to an instance where you had to wait for a while in a queue to get in to a popular restaurant, then you may now understand why sometimes your job do not start instantly as in your laptop.
The scheduler used in this lesson is Slurm. Although Slurm is not used everywhere, running jobs is quite similar regardless of what software is being used. The exact syntax might change, but the concepts remain the same.
Running a Batch Job
The most basic use of the scheduler is to run a command non-interactively. Any command (or series of commands) that you want to run on the cluster is called a job, and the process of using a scheduler to run the job is called batch job submission.
In this case, the job we want to run is just a shell script. Let’s
create a demo shell script to run as a test. The landing pad will have a
number of terminal-based text editors installed. Use whichever you
prefer. Unsure? nano is a pretty good, basic choice.
BASH
userid@ln03:~> nano example-job.sh
userid@ln03:~> chmod +x example-job.sh
userid@ln03:~> cat example-job.shOUTPUT
#!/bin/bash
echo -n "This script is running on "
hostnameOUTPUT
This script is running on ln03This job runs on the login node.
If you completed the previous challenge successfully, you probably
realise that there is a distinction between running the job through the
scheduler and just “running it”. To submit this job to the scheduler, we
use the sbatch command.
OUTPUT
sbatch: Warning: Your job has no time specification (--time=) and the default time is short. You can cancel your job with 'scancel <JOB_ID>' if you wish to resubmit.
sbatch: Warning: It appears your working directory may be on the home filesystem. It is /home2/home/ta180/ta180/userid. This is not available from the compute nodes - please check that this is what you intended. You can cancel your job with 'scancel <JOBID>' if you wish to resubmit.
Submitted batch job 286949Ah! What went wrong here? Slurm is telling us that the file system we
are currently on, /home, is not available on the compute
nodes and that we are getting the default, short runtime. We will deal
with the runtime later, but we need to move to a different file system
to submit the job and have it visible to the compute nodes. On ARCHER2,
this is the /work file system. The path is similar to home
but with /work at the start. Lets move there now, copy our
job script across and resubmit:
BASH
userid@ln03:~> cd /work/ta180/ta180/userid
userid@ln03:/work/ta180/ta180/userid> cp ~/example-job.sh .
userid@ln03:/work/ta180/ta180/userid> sbatch --partition=standard --qos=short example-job.shOUTPUT
Submitted batch job 36855That’s better! And that’s all we need to do to submit a job. Our work
is done — now the scheduler takes over and tries to run the job for us.
While the job is waiting to run, it goes into a list of jobs called the
queue. To check on our job’s status, we check the queue using
the command squeue -u userid.
OUTPUT
JOBID USER ACCOUNT NAME ST REASON START_TIME T...
36856 yourUsername yourAccount example-job.sh R None 2017-07-01T16:47:02 ...We can see all the details of our job, most importantly that it is in
the R or RUNNING state. Sometimes our jobs
might need to wait in a queue (PENDING) or have an error
(E).
The best way to check our job’s status is with squeue.
Of course, running squeue repeatedly to check on things can
be a little tiresome. To see a real-time view of our jobs, we can use
the watch command. watch reruns a given
command at 2-second intervals. This is too frequent, and will likely
upset your system administrator. You can change the interval to a more
reasonable value, for example 15 seconds, with the -n 15
parameter. Let’s try using it to monitor another job.
BASH
userid@ln03:/work/ta180/ta180/userid> sbatch --partition=standard --qos=short example-job.sh
userid@ln03:/work/ta180/ta180/userid> watch -n 15 squeue -u useridYou should see an auto-updating display of your job’s status. When it
finishes, it will disappear from the queue. Press Ctrl-c
when you want to stop the watch command.
Where’s the Output?
On the login node, this script printed output to the terminal — but
when we exit watch, there’s nothing. Where’d it go? HPC job
output is typically redirected to a file in the directory you launched
it from. Use ls to find and read the file.
Customising a Job
The job we just ran used some of the scheduler’s default options. In a real-world scenario, that’s probably not what we want. The default options represent a reasonable minimum. Chances are, we will need more cores, more memory, more time, among other special considerations. To get access to these resources we must customize our job script.
Comments in UNIX shell scripts (denoted by #) are
typically ignored, but there are exceptions. For instance the special
#! comment at the beginning of scripts specifies what
program should be used to run it (you’ll typically see
#!/bin/bash). Schedulers like Slurm also have a special
comment used to denote special scheduler-specific options. Though these
comments differ from scheduler to scheduler, Slurm’s special comment is
#SBATCH. Anything following the #SBATCH
comment is interpreted as an instruction to the scheduler.
Let’s illustrate this by example. By default, a job’s name is the
name of the script, but the --job-name option can be used
to change the name of a job. Add an option to the script:
OUTPUT
#!/bin/bash
#SBATCH --job-name new_name
echo -n "This script is running on "
hostname
echo "This script has finished successfully."Submit the job and monitor its status:
BASH
userid@ln03:/work/ta180/ta180/userid> sbatch --partition=standard --qos=short example-job.sh
userid@ln03:/work/ta180/ta180/userid> squeue -u useridOUTPUT
JOBID USER ACCOUNT NAME ST REASON START_TIME TIME TIME_LEFT NODES CPUS
38191 yourUsername yourAccount new_name PD Priority N/A 0:00 1:00:00 1 1Fantastic, we’ve successfully changed the name of our job!
Resource Requests
But what about more important changes, such as the number of cores and memory for our jobs? One thing that is absolutely critical when working on an HPC system is specifying the resources required to run a job. This allows the scheduler to find the right time and place to schedule our job. If you do not specify requirements (such as the amount of time you need), you will likely be stuck with your site’s default resources, which is probably not what you want.
The following are several key resource requests:
-
--nodes=<nodes>- Number of nodes to use -
--ntasks-per-node=<tasks-per-node>- Number of parallel processes per node -
--cpus-per-task=<cpus-per-task>- Number of cores to assign to each parallel process -
--time=<days-hours:minutes:seconds>- Maximum real-world time (walltime) your job will be allowed to run. The<days>part can be omitted.
Note that just requesting these resources does not make your job run faster, nor does it necessarily mean that you will consume all of these resources. It only means that these are made available to you. Your job may end up using less memory, or less time, or fewer tasks or nodes, than you have requested, and it will still run.
It’s best if your requests accurately reflect your job’s requirements. We’ll talk more about how to make sure that you’re using resources effectively in a later episode of this lesson.
Command line options or job script options?
All of the options we specify can be supplied on the command line (as
we do here for --partition=standard) or in the job script
(as we have done for the job name above). These are interchangeable. It
is often more convenient to put the options in the job script as it
avoids lots of typing at the command line.
Submitting Resource Requests
Modify our hostname script so that it runs for a minute,
then submit a job for it on the cluster. You should also move all the
options we have been specifying on the command line
(e.g. --partition) into the script at this point.
OUTPUT
#!/bin/bash
#SBATCH --time 00:01:15
#SBATCH --partition=standard
#SBATCH --qos=short
echo -n "This script is running on "
sleep 60 # time in seconds
hostname
echo "This script has finished successfully."Why are the Slurm runtime and sleep time not
identical?
Job environment variables
When Slurm runs a job, it sets a number of environment variables for
the job. One of these will let us check our work from the last problem.
The SLURM_CPUS_PER_TASK variable is set to the number of
CPUs we requested with -c. Using the
SLURM_CPUS_PER_TASK variable, modify your job so that it
prints how many CPUs have been allocated.
Resource requests are typically binding. If you exceed them, your job will be killed. Let’s use walltime as an example. We will request 30 seconds of walltime, and attempt to run a job for two minutes.
OUTPUT
#!/bin/bash
#SBATCH --job-name long_job
#SBATCH --time 00:00:30
#SBATCH --partition=standard
#SBATCH --qos=short
echo "This script is running on ... "
sleep 120 # time in seconds
hostname
echo "This script has finished successfully."Submit the job and wait for it to finish. Once it is has finished, check the log file.
BASH
userid@ln03:/work/ta180/ta180/userid> sbatch example-job.sh
userid@ln03:/work/ta180/ta180/userid> watch -n 15 squeue -u useridOUTPUT
This job is running on:
nid001147
slurmstepd: error: *** JOB 38193 ON cn01 CANCELLED AT 2017-07-02T16:35:48 DUE TO TIME LIMIT ***Our job was killed for exceeding the amount of resources it requested. Although this appears harsh, this is actually a feature. Strict adherence to resource requests allows the scheduler to find the best possible place for your jobs. Even more importantly, it ensures that another user cannot use more resources than they’ve been given. If another user messes up and accidentally attempts to use all of the cores or memory on a node, Slurm will either restrain their job to the requested resources or kill the job outright. Other jobs on the node will be unaffected. This means that one user cannot mess up the experience of others, the only jobs affected by a mistake in scheduling will be their own.
But how much does it cost?
Although your job will be killed if it exceeds the selected runtime, a job that completes within the time limit is only charged for the time it actually used. However, you should always try and specify a wallclock limit that is close to (but greater than!) the expected runtime as this will enable your job to be scheduled more quickly. If you say your job will run for an hour, the scheduler has to wait until a full hour becomes free on the machine. If it only ever runs for 5 minutes, you could have set a limit of 10 minutes and it might have been run earlier in the gaps between other users’ jobs.
Cancelling a Job
Sometimes we’ll make a mistake and need to cancel a job. This can be
done with the scancel command. Let’s submit a job and then
cancel it using its job number (remember to change the walltime so that
it runs long enough for you to cancel it before it is killed!).
BASH
userid@ln03:/work/ta180/ta180/userid> sbatch example-job.sh
userid@ln03:/work/ta180/ta180/userid> squeue -u useridOUTPUT
Submitted batch job 38759
JOBID USER ACCOUNT NAME ST REASON START_TIME TIME TIME_LEFT NODES CPUS
38759 yourUsername yourAccount example-job.sh PD Priority N/A 0:00 1:00 1 1Now cancel the job with its job number (printed in your terminal). Absence of any job info indicates that the job has been successfully cancelled.
BASH
userid@ln03:/work/ta180/ta180/userid> scancel 38759
# It might take a minute for the job to disappear from the queue...
userid@ln03:/work/ta180/ta180/userid> squeue -u useridOUTPUT
JOBID USER ACCOUNT NAME ST REASON START_TIME TIME TIME_LEFT NODES CPUSCancelling multiple jobs
We can also cancel all of our jobs at once using the -u
option. This will delete all jobs for a specific user (in this case us).
Note that you can only delete your own jobs. Try submitting multiple
jobs and then cancelling them all with
scancel -u yourUsername.
Other Types of Jobs
Up to this point, we’ve focused on running jobs in batch mode. Slurm also provides the ability to start an interactive session.
There are very frequently tasks that need to be done interactively.
Creating an entire job script might be overkill, but the amount of
resources required is too much for a login node to handle. A good
example of this might be building a genome index for alignment with a
tool like HISAT2.
Fortunately, we can run these types of tasks as a one-off with
srun.
srun runs a single command in the queue system and then
exits. Let’s demonstrate this by running the hostname
command with srun. (We can cancel an srun job
with Ctrl-c.)
OUTPUT
nid001976srun accepts all of the same options as
sbatch. However, instead of specifying these in a script,
these options are specified on the command-line when starting a job.
Typically, the resulting shell environment will be the same as that
for sbatch.
Interactive jobs
Sometimes, you will need a lot of resource for interactive use.
Perhaps it’s our first time running an analysis or we are attempting to
debug something that went wrong with a previous job. Fortunately, SLURM
makes it easy to start an interactive job with srun:
You should be presented with a bash prompt. Note that the prompt may
change to reflect your new location, in this case the compute node we
are logged on. You can also verify this with hostname.
When you are done with the interactive job, type exit to
quit your session.
Running parallel jobs using MPI
As we have already seen, the power of HPC systems comes from parallelism, i.e. having lots of processors/disks etc. connected together rather than having more powerful components than your laptop or workstation. Often, when running research programs on HPC you will need to run a program that has been built to use the MPI (Message Passing Interface) parallel library. The MPI library allows programs to exploit multiple processing cores in parallel to allow researchers to model or simulate faster on larger problem sizes. The details of how MPI work are not important for this course or even to use programs that have been built using MPI; however, MPI programs typically have to be launched in job submission scripts in a different way to serial programs and users of parallel programs on HPC systems need to know how to do this. Specifically, launching parallel MPI programs typically requires four things:
- A special parallel launch program such as
mpirun,mpiexec,srunoraprun. - A specification of how many processes to use in parallel. For example, our parallel program may use 256 processes in parallel.
- A specification of how many parallel processes to use per compute node. For example, if our compute nodes each have 32 cores we often want to specify 32 parallel processes per node.
- The command and arguments for our parallel program.
Required Files
The program used in this example can be retrieved using wget or a browser and copied to the remote.
Using wget:
Using a web browser:
https://epcced.github.io/2024-11-06-archer2-hpc-intro/files/pi-mpi.py
To illustrate this process, we will use a simple MPI parallel program
that estimates the value of Pi. (We will meet this example program in
more detail in a later episode.) Here is a job submission script that
runs the program across two compute nodes on the cluster. Create a file
(e.g. called: run-pi-mpi.slurm) with the contents of this
script in it.
BASH
#!/bin/bash
#SBATCH --partition=standard
#SBATCH --qos=short
#SBATCH --time=00:05:00
#SBATCH --nodes=1
#SBATCH --ntasks-per-node=16
module load cray-python
srun python pi-mpi.py 10000000The parallel launch line for our program can be seen towards the bottom of the script:
And this corresponds to the four required items we described above:
- Parallel launch program: in this case the parallel launch program is
called
srun; the additional argument controls which cores are used. - Number of parallel processes per node: in this case this is 16, and
is specified by the option
--ntasks-per-node=16option. - Total number of parallel processes: in this case this is also 16, because we specified 1 node and 16 parallel processes per node.
- Our program and arguments: in this case this is
python pi-mpi.py 10000000.
As for our other jobs, we launch using the sbatch
command.
The program generates no output with all details printed to the job log.
Running parallel jobs
Modify the pi-mpi-run script that you used above to use all 128 cores on one node. Check the output to confirm that it used the correct number of cores in parallel for the calculation.
Configuring parallel jobs
You will see in the job output that information is displayed about where each MPI process is running, in particular which node it is on.
Modify the pi-mpi-run script that you run a total of 2 nodes and 16 processes; but to use only 8 tasks on each of two nodes. Check the output file to ensure that you understand the job distribution.
Key Points
- “The scheduler handles how compute resources are shared between users.”
- “Everything you do should be run through the scheduler.”
- “A job is just a shell script.”
- “If in doubt, request more resources than you will need.”